Видео

Wanda whale & leaf filter - do they come with those hoses you have them all connected to?

Hey! Awesome video, same EXACT issue with mine. Looking to see what/where you got your baffle plate from? Mine is like the ocean, full of waves XD

Curious on what type of liner did you use. You initially just flipped the liner over the sides and it stayed. Nice video!

Great video, I'm going to give this a try. Nissan wants $200 for the shoes and $300 for labor. 🤯 I really appreciate you taking the time to make this video. Let's hope I have half the patience you have. 🤞🏼

You put the wrong gasket on the inside of the pool. You’re supposed to use the rubber gasket for the inside and the paper on the outside. Thats why the gasket keeps deteriorating!!! The paper on goes on before you screw the nut on the

What was your superheat at when you finished?

Thanks, for simple and visually informative explanation. Blessings 🎉

I'm trying to find out how to repair the wheel of the brush hog anyone know? Looos like the shaft broke off

Rockin' the old school tighty whities 👍

Big thanks one question after checking impeller upon removing prop, I had a lot of plastic debris that fell out. Is there another busing inside the prop housing which the pin connects too?

At the 17:11 mark, I thought you were going to drain the water in there after you took out the sand. Are you suppose to fill it half way with water as I see to a certain point before installing and backwashing begins? That confused me.

Very helpful and easy repair! Highly recommend a pulley remover tool which you can loan from your local auto store. I managed to get mine off without but it caused quite a headache. Definitely keep the extra spacers as well. I actually ended up needing the two new ones olus one of the old ones. I'm decent with tooling and probably a 5/10 woth cars, and this took just over and hour to get done, having the pulley remover would have probably put me well below the hour mark. Having an extra set of hands also certainly sped up the process, as you can get to different parts of it from the top and side in a 2012 Nissan Rogue

Is the position of the adjuster the same for all males and models?

Of course it's heavy. You put 2 gallons of water in it.

Can u still use the clickers?

Excellent explanation and demonstration. This is the year I have to replace ours. First video I clicked on ! That never happens. Thank you.

Bot flys are growing on this one.

Luci would be proud

always hungry lol, great video!

The feather in her nose blowing in and out 😅

❤

Very informative and straight to the point. A pleasure!

I wish I could have watched your video before I started my project. I took the filter out and fell into the same mistake that you had. Im struggling with it. I put everything together and added the fluid. I started the car and it doesn't shift. What would you recommend I do now?

Nice and smooth.

What position do you have your pool in while using Wanda the whale?

Hayward's manual sucks.

Good video only thing I'm gonna change is using a spring loaded safety knife.

Thank you for this! Do you happen to know if wide skimmers are of the same size? Can't seem to find the exact same skimmer product that my pool has. Thanks

Beautiful 👍

Hello there! I probably have the exact same problem! Suddenly abs, traction control and hill assist are on at the same time! At first many results from google search showing it’s should be the issue with brake light switch. I replaced it and it didn’t help. I’m glad that I found your video. I might give it a try! My question is that do I have to check every single wheel? I used a little Bluetooth scanner and it does read any error at all.

Mama chick’s gonna have a heart attack the first time those ducklings head to the water.

How wonderful. Bawk, bawk.

Awesome instructions and easy to follow!!!!😁

Whats the 1st thing you should you do after everything is hooked back up and pool is filled?

I have a Mazda 3 2010. I wish to have one of these gas stations. It is very expensive in my country. And the original material is not available.😭😭😭😭😭😭😭😭😭😭😭😭😭😭😭😭😭

Is it driveway? can you drive over it?

What are the mounting screws? How long?

Thank you for the video. The manual had zero instructions.

Is the order 1234 or 1342?

People, please give this guy a thumbs up. He saved me a living nightmare. I'm not a mechanic and I have no idea how to drop a valve body, much less put it back in with a mystery spring complicating things. Leaving the nut in there could potentially do damage. I had a similar situation happen to me when I changed the entire lighting assembly in my home because the ballast failed. There were 4 screws holding the assembly in place and sure enough, once you take them out and try to put them back in, the nuts that hold them in place have moved. The only way to fix this is to go to the second floor, and move the beds and furniture, tear out the floor, and find the 4 nuts. The people that designed these things knew this was going to happen. They knew a car would be stranded in someone's garage, and yet they did it anyway.

Great video. Used this as guide to fix a Code 10 on my RL75i. Found buckets of moths in the fan.

The details are explained better than i have ever seen! Thank you for such a through explanation!

Good video! Did you ever make the wall hook video?

The best info I found

So, that HH-66 is the best glue? Great video man! I was not aware that you can take the glue brush underwater to touch up the edges. That makes a huge difference! I’ve ripped too many patches off because the edges wouldn’t stay down. Thanks!!!!

Do you drill all the holes at an angle?

You’re welcome mat says welcome to the nuthouse. He’s just looking for his fair share.

You didn’t finish the job which included the hose to the pump.

How u deal with water bugs ?

I guess you just need to cut everything out later when you need to replace ball valves since it's all cemented together. Seems cost effective?